Products

GNI ORTHO provides state-of-the-art orthodontic products
that are developed in Korea and marketed worldwide

Orthodontic Pliers & Tools

Orthodontic Pliers & Tools

PLIERS

Orthodontic Pliters

Light wire plier

  • Item No. : P01-01

    Package : 1*1

    with cutter

  • suitable for all different sizes of delicate loops and springs. cutting edge, in the middle part of the bird beak, is stiff and sharp. It can be used to cut surplus wire, for round wires not up to 0.6mm and rectangular wires not up to 0.56*0.71mm
  • Item No. : P01-02

    Package : 1*1

    without cutter

  • suitable for all different sizes of delicate loops and springs. for round wires not up to 0.6mm and rectangular wires not up to 0.56*0.71mm

Distal end cutter

  • Item No. : P02-01

    Package : 1*1

    standard

  • suitable for cutting the end of longer wires, the beak is in special form so that wke ends will not shoot out to the mouth but stay at the beak. For wire not up to 0.56*0.71mm
  • Item No. : P02-02

    Package : 1*1

    king size

  • suitable for cutting the end of longer wires, the beak is in special form so that wire ends will not shoot out to the mouth but stay at the beak. For wire not up to 0.56*0.71mm
  • Item No. : P02-03

    Package : 1*1

    flush

  • it's special “U” tips can be used to truncate the long end of wires parallel to tubes, its cutting capacity: 0.016”-0.018*0.022”

Ligature cutter

  • Item No. : P03-01

    Package : 1*1

    with spring lamination

  • the inner side of the handles is built with spring lamination so that the cutter remains natural open condition and it is convenient to use. it can be used to cut ligature wires and rubber bands less than 0.4mm, it is prohibited to cut hard wires.
  • Item No. : P03-02

    Package : 1*1

    standard

  • the inner side of the handles is built with spring lamination so that the cutter remains natural open condition and it is convenient to use. it can be used to cut ligature wires and rubber bands less than 0.4mm, it is prohibited to cut hard wires.
  • Item No. : P03-03

    Package : 1*1

    lingual ligature cutter

  • curved blade, it is used to the lingual orthodontics and to cut the flexible ligature or rubber, the maximum cutting capacity is 0.4mm. (it is prohibited to cut hard wires.)

Heavy wire cutter

  • Item No. : P04-01

    Package : 1*1

    Heavy wire cutter

  • for hard wires, it's used to cut the hard wire and Niti wire under 0.8mm.

Torque bending plier

  • Item No. : P05-01

    Package : 1*1

    twin heads with torque template

  • for applying torque to a specific part of edgewise wire, used with torque template. Torque template size 0.019*0.022".
  • Item No. : P05-02

    Package : 1*1

    torque bending plier (Male - Female set)

  • for applying torque to edgewise, often used in pairs, for hard wires not up to 0.56*0.71mm

Kim plier

  • Item No. : P06-01

    Package : 1*1

    Kim plier

  • for bending multi-loop edgewise arch wires, with cutter in the middle part. For rectangular wires not up to 0.022". three step loop formers are Ф 1.5mm, 2mm, 2.6mm.

Loop forming plier

  • Item No. : P07-01

    Package : 1*1

    tweed plier

  • for bending loops on the wires, especially stop loops and omega loops.

How plier

  • Item No. : P08-01

    Package : 1*1

    Straight

  • for positioning wires into the buccal tubes, ligature wires and seating individual anterior teeth, long slending curved lip-safe tips increasing efficiency in positioning areas
  • Item No. : P08-02

    Package : 1*1

    Curve

  • for positioning wires into the buccal tubes, ligature wires and seating individual anterior teeth, long slending curved lip-safe tips increasing efficiency in positioning areas.

Young loop bending plier

  • Item No. : P09-01

    Package : 1*1

  • designed for marking identical loops on square or rectangular wires up to 0.56*0.71mm. three step loop fromers Ф 1.3mm, 3mm and 4.2mm.

Weingart plier

  • Item No. : P10-01

    Package : 1*1

  • long slender curved lip-safe lips with beak, for positioning the arch to the buccal tubes, uncovering convertible buccal and bending the arch wire ends at the back of tubes, etc.

Nance loop bending plier

  • Item No. : P11-01

    Package : 1*1

  • for bending different vertical loops, foue grooves at tip for bending identical loops: 3mm, 4mm, 5mm, 6mm for wires up to 0.6mm.

Brackets removing plier

  • Item No. : P12-01

    Package : 1*1

    for anterior teeth

  • for removing brackets by cutting the adhesive part.
  • Item No. : P12-02

    Package : 1*1

    for posterior teeth

  • for removing brackets by cutting the adhesive part.
  • Item No. : P12-03

    Package : 1*1

    for ceramic

  • specially designed to remove ceramic brackets, angled tip allows for easier and quicker removing.

Band removing plier

  • Item No. : P13-01

    Package : 1*1

    long tip

  • under the fulcrum of stainless steel pad occlusal point, it removes the posterior bands with long slending shisel tip. Also for removing brackets.
  • Item No. : P13-02

    Package : 1*1

    short tip

  • under the fulcrum of stainless steel pad occlusal point, it removes the posterior bands with long slending chisel tip. Also for removing brackets.

Adhesives remove plier

  • Item No. : P14-01

    Package : 1*1

  • removes any remaining adhesive on the tooth without harming the enamel, edges can be ground on the grinding wheel to keep sharp.

Three-prong plier

  • Item No. : P15-01

    Package : 1*1

  • for shaping and bending every kinds of ligatures, especially the niti wire

Crimpable hook placement

  • Item No. : P16-01

    Package : 1*1

  • for locking sliding tubes onto the wire, making locking easier

Separator placing plier

  • Item No. : P17-01

    Package : 1*1

    Heavy wire cutter

  • bending in the front to make it easier to put separating modules under the molar contact point.

Buccal tube convertible cap removing plier

  • Item No. : P18-01

    Package : 1*1

  • used for convertible buccal tubes.

Multi-functional plier

  • Item No. : P19-01

    Package : 1*1

  • combination of bending light wire and "U" loops and cutting hard wirer. suitable for all different size of delicate loops and "U" loops. With cutter in the middle part for cutting the surplus steel wire.

Ligature bending plier

  • Item No. : P20-01

    Package : 1*1

  • used for bending ligatures

Distal end bending plier

  • Item No. : P21-01

    Package : 1*1

    king size

  • it is mainly used to bend the end of hard wires, especially the niti wires, there is no need to heat the niti wires when they are bended by these pliers, its maximum bending capactity is 0.021" in diameter.

Utility plier

  • Item No. : P22-01

    Package : 1*1

  • it is mainly used to the lingual orthodontics and to hold the lingual ligature to bend the ligature. It has a small curved blade with tooth.

Bird beak plier

  • Item No. : P23-01

    Package : 1*1

    long head

    Item No. : P23-02

    Package : 1*1

    short head

  • designed for fine bending many kinds of loops on archwire.

Hollow chop plier

  • Item No. : P24-01

    Package : 1*1

  • designed for contouring and forming of orthodontic archwires, easily bending SS round wire and edgewise.

V-shape bending plier

  • Item No. : P25-01

    Package : 1*1

  • designed for marking 1mm V-bends on the archwire, to shorten archwire and prevent wire creeping, (wire up to 0.022”)

Lingual arch forming plier

  • Item No. : P26-01

    Package : 1*1

  • designed for marking lingual bends, forming double-back and triple-back bends by distal end of archwire in 0.03” or 0.036" for inserting in lingual sheaths.

Ligature tying plier

  • Item No. : P27-01

    Package : 1*1

  • designed for quickly and easily tying ligature wire.

Stand for plier

  • Item No. : P00-01

    Package : 1*1

  • made of stainless steel, suitable for high temperature sterilization

TOOLS

Orthodontic Tools

Band seater

  • Band elevator Item No. : T02-01

    Band pusher Item No. : T02-02

Star-like brackets positioning gauge

  • For anterior teeth Item No. : T03-01

    For posterior teeth Item No. : T03-02

Pole-like brackets positioning gauge

  • size 3.5, 4mm ; 4.5, 5mm

    Item No. : T03-03

     

    size 2, 2.5mm; 3, 3.5mm ; 4, 4.5mm ; 5, 5.5mm ; 6, 6.5mm

    Item No. : T03-04

     

    Single pole two heads size 3.5, 4mm ; 4.5, 5mm

    Item No. : T03-05

     

    Movable two heads size 3.5, 4mm ; 4.5, 5mm

    Item No. : T03-06

     

    positioning needle helps accurate and simple vertical positioning, for MBT brackets and edgewise brackets, in 4 forms.

Bracket tweezers

  • Item No. : T04-01-01 / T04-01-02

    Multi-functional

  • used for both anterior and posterior teeth with adhesive removing head. It is suitable to remove extra adhesives.

Bracket tweezers

  • Item No. : T04-02

    Innovated product

  • for anterior teeth

Buccal tweezers

  • Item No. : T05-01

  • it is used to hold the buccal tubes reversely when the buccal tubes are to be bonded. Its slim and curved tips make it more convenient in use.

Tension and stress gauge

  • Item No. : T05-02

  • for measuring gram and ounce tension force

Ligature tucker

  • Item No. : T06-01

    Double tips

  • Item No. : T06-02

    Multi-functional

  • for ligature adjuster and tucket after ligating

Arch wire former

Specification Item No. Package Remark
type I stahiless steel T111-01 1*1 Working part made of pure stainless steel with full range of precise common slots; 0.016", 0.017", 0.018", 0.019", 0.022"
type II aluminum T111-02 1*1